What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 18.06.2025 00:28

Now when you have a certain ac resistance, then a current flows in a loop.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
2024–10–16 [ OO OLAOYE OYEBODE ]
What are some reasons why people may fear strong men?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
The third is lightning and “how it gets conducted into a home.”
But… the neutral is now “floating” because of the 1 ohm resistance.
What do you think of the Quora group "It's Ok to Be White" for people who are proud of being white?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Because the load is inductive, the current lags the voltage.(by a bit).
A fuse is a non-resetable over current circuit protector.
What are some effective strategies for getting more upvotes on Quora?
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This is where this question deviates from being a 'generic' question, and becomes more specific.
a photo is worth a thousand words.
Why did my ex move on so quickly?
so, what happens?
First Sentence:
I post the exact comment here.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
These devices are installed between the “hot” and “neutral” and protective ground.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Are there any nude pictures of women with big tits?
Upvotes:
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
An AC voltage/ current source, and an ac inductive load.
Edit 2024–10.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
In your opinion, who is the most overrated singer/band/artist in modern music history and why?
but this device (an Inductor) … impedes the rapid changes in the current.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
eight
King Charles III pays respects to Air India crash victims at his annual birthday parade - PBS
One is “what exactly is in a ‘surge protector’ ? ”
There are three different concepts here that are getting confused.
Here is a simplified AC power diagram.
15-Year WWE Record Broken On SmackDown - WrestleTalk
Barnstars:
In schematic diagrams this is the symbol for a fuse:
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
What is the opposite personality type of someone with ASPD (antisocial personality disorder)?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
The bolt then partially travels down the line to your home.
What is lightning?
Do most men prefer curvy women or skinny women?
2024–10–14 [Omar Gharbi Omar Gharbi ]
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Why do I sweat so much after shower?
The other is “what does a “fuse” do?”
This one hit behind the barn.
These are simplified answers to the original question, and does not change anything I wrote above.
What are some good Caribbean islands to travel to with friends or family? Why?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
It seems Mohan does not understand the difference between a comment and an Answer.
He then asserts :
Can the fuse protect the electronic devices from lightning instead of a surge protector.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
the problem then depends on "how fast does the fuse operate?".
This device then solves the entire problem.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
It also is a device that limits the change in current flow.
2024–10–10[John johnson John Johnson ]
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
[old diagram got deleted by accident]
He then describes the function of a fuse.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
But it can get overloaded, and no longer works.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This is 'the assistant's answer'
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
He then describes Rainy Season and Lightning.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
At one ohm, the resistor has a maximum of 1 watt power.
There are two important concepts here.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
nine
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
For this case there are devices called Metal oxide varistors (MOV).
what exactly is a ‘surge’ protector?
but I think this circuit , shows a few more pieces.
So, the voltage could go up to 500 volts, and the fuse will not open up.
The MOV will conduct when the voltage exceeds 50% of line voltage.
What does a fuse do?
This is where the MOV conducts again, and dissipated the energy.
At least they know the answer if they wanted it.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
A circuit breaker is similar, but is resettable.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
[image of Common-mode choke]
One
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
(Dc diagram shown, AC is similar).